2 Connect the USB adaptor to the player.
Insert the USB adaptor as shown below until it clicks into place.
“PC Connect” appears in the display. The setup display for automatic transfer appears in the SonicStage window. Follow the instructions in the window. For details, see the SonicStage Help ( page 16).
USB adaptor connector
USB adaptor
3 Click “Transfer” on the right side of the SonicStage window.
The screen is switched to the Transfer window.
4 Select “ATRAC Audio Device” from the Transfer Destination list on the right side of the SonicStage window.
5 Click the tracks you want to transfer from the My Library list on the left side of the SonicStage window.
To transfer more than one track, hold down the “Ctrl” key while selecting the tracks. To transfer all tracks of the album, click the album.
6 Click 
on the SonicStage window.
Transfer of the selected tracks starts. You can check the transferring status on the SonicStage window.
To stop transferring
Click 
on the SonicStage window.
Notes
Do not use the player where it will be subjected to vibration when transferring audio data. Also, do not place the player near magnetic objects.
To remove the USB adaptor from the player
While pressing the gray buttons on both sides, push the USB adaptor inward, and then pull it outward.
Continued
