The display turns off. | The display automatically turns off if there is no operation for |
| about 30 seconds (when using the battery) or about 3 minutes |
| (when using the AC power adaptor) in stop mode. When |
| scrolling track titles, etc., the display turns off about 30 seconds |
| or about 3 minutes after scrolling is finished. Also, the display |
| turns off when pressing and holding MENU. For all the cases, |
| press any button to turn on the display again. |
|
|
Connection with the computer/SonicStage
Symptom | Case and/or corrective action |
The SonicStage software cannot | An operating system not compatible with the software is used |
be installed. | ( page 10). |
| All Windows applications are not closed. If you start the |
| installation while other programs are running, a malfunction |
| may occur. This is especially true for programs that require |
| large amounts of system resources, such as |
| software. |
| There is not enough space on the hard disk of your computer. |
| You need 200 MB or more free space. Delete the unnecessary |
| files on your computer. |
|
|
The installation appears to have | Check for the appearance of an error message beneath the |
stopped before it has finished. | installation window. Press the “Tab” key while holding |
| down the “Alt” key. If an error message has appeared, press |
| the “Enter” key. The installation will resume. If there is no |
| message, the installation is still in progress. Wait for a little |
| while longer. |
|
|
The progress bar on the display of | The installation is progressing normally. Please wait. The |
your computer is not moving. The | installation may take 30 minutes or more, depending on your |
access lamp of your computer has | CD drive or system environment. |
not lit for a few minutes. |
|
“PC Connect” is not displayed | Please wait for the authentication of the SonicStage software. |
when connecting to the computer | Another application is running on the computer. Wait for a |
with the USB cable. | while and reconnect the USB cable. If the problem persists, |
| disconnect the USB cable, restart the computer, and then |
| reconnect the USB cable. |
| The USB cable is not connected properly. Disconnect the USB |
| cable and then reconnect it. |
| A USB hub is used. Connecting via a USB hub is not |
| guaranteed. Connect the USB cable directly to the computer. |
|
|
Additional Information
Continued
