Connecting Other Devices
You can listen to tracks through a stereo system and record tracks in the player onto a MiniDisc or a cassette tape. See the instruction manual that comes with the device you want to connect.
Be sure to turn off all devices before making the connections and changing the settings and explained below.
to (headphones)/ 
LINE OUT jack
Connecting cord 
(minijack, not supplied)
Left (white) 
Right (red)
MiniDisc recorder, AV amplifier, active speaker, cassette recorder, etc.
You need to change the setting for “Audio Out” in the MENU display to output sound to the connected device. The settings of “Audio Out” are shown below. To make those settings, see page 29.
Connected device | Setting |
Headphones | Headphone |
Device connected using the | Line Out |
connecting cord |
|
When you connect another device, set this to “Line Out.” When the setting is “Line Out,” volume cannot be adjusted, and the settings in “Sound” is not available and do not work.
Notes
•When the supplied headphone is connected to the player, do not set “Audio Out” to “Line Out.” If it is set to “Line Out,” the volume cannot be adjusted and the sound will be distorted and noisy.
•Before playback, turn down the volume of the connected device to avoid damaging the connected speaker.
