Using Infrared Communication Devices
"! |
✍Infrared communication capability can be turned on and off. By default, it is not enabled when your system is shipped. To enable infrared use, click the infrared icon in the Windows Control Panel and select the Enable infrared communication check box on the Options tab.
You can disable infrared communication when you are not using it to conserve battery life.
Use the infrared icon in the Windows Control Panel to enable and disable infrared communication. Do not use the icon in the taskbar.
Check the Status tag of the Infrared Monitor in the Windows Control Panel to determine if the infrared device is detected.
If the two devices are too far apart or too close together, data transfer may be interrupted or there may be noise in the transmission.
Do not cover the infrared ports with your hand or any other object.
Avoid direct sunlight, fluorescent light, or flashing incandescent light near the infrared ports.
The active area of infrared transmission extends about 39 !/&inches (1 meter) with a radius of approximately 15 degrees.
39
3/8
|
|
|
| ) |
|
|
| m | |
|
| s(1 |
| |
| e |
|
| |
ch |
|
|
| |
in |
|
|
|
|
Infrared port
approximately 15 degrees
