Getting Help

n N

81

 

 

 

Sony Notebook Computer User Guide

Troubleshooting (Windows® 98 systems)

￿

If you have plugged the computer into an UPS, make sure the UPS is turned on

 

and working.

￿

If you are using an external display, check that it is plugged into a power source

 

and turned on. Check that you have switched to the external display and that the

 

brightness and contrast controls are adjusted correctly. Please refer to the manual

 

supplied with your display for details.

￿

Moisture condensation may have occurred. Do not use the computer for at least

 

one hour and then turn it on.

￿

When the internal backup battery is low on power, it may not be able to start your

 

system properly.

 

The message “Press <F1> to resume, <F2> to setup” would appear at the bottom

 

of the display. Should this happen, you need to initialize the BIOS.

 

Follow the steps in “When I turn on my computer, the message “Operating

 

system not found” appears and Windows does not start”.

When I turn on my computer, the message “Operating system not found” appears and

Windows does not start

￿

Check the floppy disk drive to see if a non-bootable diskette is in the drive.

￿

If a non-bootable diskette is in the drive, eject it and press any key on your

 

keyboard. Windows then starts normally.

 

If Windows still does not start, follow the procedure below to initialize the BIOS.

￿

If the floppy disk drive is empty, follow the steps below to initialize the BIOS:

1

Remove any peripheral devices connected to the computer.

2

Turn the computer off and then turn it on again.

3

Turn on the computer and press the F2 key when the Sony logo appears. The

 

BIOS setup menu screen appears.