Sony PCV-RX1 Connecting to a network, Under, , select, Network Adaptors, Click Properties, The Ethernet connection is now enabled, Click OK to close the Properties window

Connecting peripheral devices			n N
Guide			50
	Connecting to a network
User
	Your computer comes with a preinstalled Ethernet interface.
Desktop
	To connect to a network, proceed as follows:
	1	Go to Start, right-click on My Computer and select Properties.
VAIO	2	Click the Hardware tab and select Device Manager.
		The Device Manager screen appears with the list of devices.
Sony	3	Under Network Adaptors, right click on Realtek RTL 8139 Family PCI Fast Ethernet NIC.
	4	Click Properties.
	5	Under Device Usage, select Use this device (enable).
	6	Click OK to close the Properties window.
		The Ethernet connection is now enabled.

! Connect only 10BASE-T/100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable may cause a malfunction, excessive heat or even fire in the port.

￿ For more information about connecting your VAIO desktop to the network, please consult the Hardware troubleshooting section of the VAIO-Link website:

How to troubleshoot network problems.

For help on connecting to a network, see your network administrator.