Upgrading your VAIO computer

n N

 

 

73

 

 

Sony VAIO Desktop User Guide

 

11Reinstall the power supply and any add-on cards or components you removed.12Reinstall the power supply by following these steps:

Rotate the power supply to its original position and slide it into the chassis until the tab snaps into position.

Replace the screw that secures the power supply to the rear of the chassis.13Replace the side cover as described in Closing the side cover (page 74).

￿ There is only one correct way to insert the memory module. Make sure the rivets of the module are lined up with the connector.

!Direct Rambus RIMMs must be upgraded in pairs. Do NOT leave the second slot of the bank empty. The second slot must be filled with either RIMM or CRIMM modules.

!Use only PC-800 RIMMs.