Sony 3-270-589-12 (1), PDW-F75 When a disc is inserted, During front panel operations

Alarm message in time	Alarm message in monitor video section	Description/action
data display section
Exchg batt!	BATTERY NEEDS REPLACING. PLEASE	The NVRAM battery is exhausted. Contact your
	CONTACT SERVICE.	Sony dealer.

When a disc is inserted

Alarm message in time	Alarm message in monitor video	Description/action
data display section	section
Unknown FS!	UNKNOWN FILE SYSTEM.	Format the disc, or eject it (see page 44).
	PLEASE FORMAT DISC OR EJECT.
No FS!	NO FILE SYSTEM.PLEASE EJECT DISC.	Eject the disc.
ILL. Disc!	IRREGULAR DISC IS USED.	Use a Professional Disc.
	USE PROFESSIONAL DISC.
Salvage NG!	CLIP SALVAGE WAS NOT COMPLETED.	See “Handling of Discs When Recording Does Not
		End Normally (Salvage Functions)” (page 45).
525/60 Clip a)	IRREGULAR DISC IS USED. DVCAM	Use another disc.
	525/60 CLIP(S) EXIST.
625/50 Clip a)	IRREGULAR DISC IS USED. DVCAM
	625/50 CLIP(S) EXIST.
4CHx16 Clip a)	DISC HAS 4CHx16 BIT CLIP(S).	Change the setting of AUDIO CONTROL >REC
	CHANGE RECORD FORMAT IN SETUP	MODE in the setup menu (see page 101).
	MENU.
2CHx16 Clip a)	DISC HAS 2CHx16 BIT CLIP(S).	Change the setting of AUDIO CONTROL >REC
	CHANGE RECORD FORMAT IN SETUP	MODE in the setup menu (see page 101).
	MENU.
No Support!	FORMAT NOT SUPPORTED.	A disc in an unsupported recording format is loaded.
	RECORDING AND PLAYBACK IS NOT	Use a disc formatted in the MPEG HD or DVCAM
	POSSIBLE.	format.
ILL. Index!	INDEX FILE ERROR.	Format the disc, or eject it (see page 44).
	PLEASE FORMAT DISC OR EJECT.
FORMAT NG!	AUTO FORMATTING WAS NOT	Eject the disc and insert it again, or insert another
	COMPLETED.	disc.
DI read err	CANNOT READ DISC
	INFORMATION.PLEASE EJECT DISC.
Read err
DRV ADJ err	CANNOT PERFORM AUTO DRIVE
	ADJUSTMENT.

a)Displayed only when DISPLAY CONTROL >ALARM is set to “ON” or “LIMITED”.

During front panel operations

Alarm message in time	Alarm message in monitor video	Description/action
data display section	section
KEY INHI.! a)	KEY INHIBIT MODE IS SELECTED.	This appears when the KEY INH (SHIFT + DISPLAY)
		button is on.
		Turn the KEY INH button off.
REMOTE! a)	REMOTE MODE IS SELECTED.	Set the remote control switch to “LOCAL”.
	SET REMOTE/LOCAL/NETWORK
	SWITCH TO LOCAL.
No Disc! a)	NO DISC.	Insert a disc and try again.

Appendix

Troubleshooting 117