1Analog video signal input/output section

1 REF VIDEO INPUT connectors

1Chapter

2 COMPOSITE OUTPUT

connectors

 

REF VIDEO INPUT

COMPOSITE OUTPUT

Overview

3 MONITOR

 

 

connector

 

MONITOR

2Analog audio signal input/output section

1 AUDIO INPUT 1/3 and 2/4 connectors

2 AUDIO OUTPUT 1/3 and 2/4 connectors

3 AUDIO MONITOR connectors

AUDIO MONITOR

R L

 

AUDIO INPUT

 

AUDIO OUTPUT

1/3

2/4

1/3

2/4

aREF VIDEO INPUT (reference video signal input)

connectors (BNC type)

The two connectors form a loop-through connection; when a reference video signal is input to the left connector, the same signal is output from the right connector () to a connected device. When no connection is made to the right connector, the left connector is automatically terminated with an impedance of 75 ohms.

bCOMPOSITE OUTPUT connectors (phono jack, BNC type)

These output composite video signals.

When CHAR SEL on page P1 of the function menu is set to “ON”, and DISPLAY CONTROL >SD CHARA in the setup menu is set to “COMPOSITE” or “ALL”, information such as timecode, menu settings, and error messages is superimposed on the output signals (see page 40).

cMONITOR connector (D-sub 15-pin)

This outputs HD analog video signals. The output signals can be switched with INTERFACE SELECT >D-SUB OUTPUT in the setup menu (see page 102).

When CHAR SEL on page P1 of the function menu is set to “ON”, and DISPLAY CONTROL >HD CHARA in the setup menu is set to “ALL”, information such as timecode, menu settings, and error messages is superimposed on the output signals (see page 40).

aAUDIO INPUT (analog audio signal input) 1/3 and 2/4 connectors (XLR 3-pin, female)

These connectors input two channels of analog audio. You can use the A1 INPUT to A4 INPUT items on the HOME page of the function menu (see page 88) to assign the signals input to connectors 1/3 (ANALOG1) and connectors 2/4 (ANALOG2) to audio channels 1 to 4. You can set the reference input levels with the setup menu item AUDIO CONTROL >LEVEL SELECT (the factory default settings are INPUT: +4 dB, REF LEVEL: –20 dB).

bAUDIO OUTPUT (analog audio signal output) 1/3 and 2/4 connectors (XLR 3-pin, male)

These output two channels of analog audio.

For 4-channel audio, you can use the INTERFACE SELECT >AUDIO OUTPUT item of the setup menu (see page 103) to select whether to output channels 1 and 2, or channels 3 and 4 (factory default setting: channels 1 and 2).

You can set the output level with the setup menu item AUDIO CONTROL >LEVEL SELECT (factory default setting: +4 dB) (see page 102).

cAUDIO MONITOR connectors (phono jack) These output audio signals for monitoring.

You can select the channels to monitor with MONI CH and MONI SEL on page P1 of the function menu (see page 89).

22 Names and Functions of Parts