The entire system menu appears in the monitor video section and on the external monitor.

An uppercase and lowercase abbreviation of the selected line only (the line in reverse video) appears in the time data display section.

2 Press the M/MARK1 or m/MARK2 button to select SETUP MENU or DISC MENU.

3 Press the ,/OUT button.

The setup menu (see page 93) or the disc menu (see page 107) appears.

SETUP MENU

OPERATIONAL FUNCTION

DISPLAY CONTROL

TIME CODE

DISC PROTECTION

VIDEO CONTROL

AUDIO CONTROL

INTERFACE SELECT

METADATA

SETUP BANK OPERATION

MENU GRADE

:ENHAN

Setup Menu

As shown in the following figure, the setup menu has three levels.

The top level shows a general classification of the setting items in the menu. Except for MENU GRADE, the actual setting items are found on the second or third level.

Setting items are divided into basic items, which are needed for normal operations, and enhanced items, which are needed for enhanced operations. In the figures, basic items are shown in bold characters.

When the unit is shipped from the factory, the setup menu is configured to display all items. To hide enhanced items, change the setting of the MENU GRADE item.

For details, see “Hiding enhanced items” on page 106.Chapter 6

Menus

System Menu 91