Once the MENU GRADE item has been set to “BASIC”, only the basic, top-level menu items appear when you press the MENU button and the ,/OUT button to display the setup menu.

SETUP MENU

OPERATIONAL FUNCTION

DISPLAY CONTROL

SETUP BANK OPERATION

 

 

 

MENU GRADE

BASIC

 

 

 

 

Current setting

Returning menu settings to their factory default settings

After making menu setting changes, to return settings to their factory default settings (setting initialization), use the following procedure.

To return a particular setting to its factory default setting

In the section , carry out the procedure up to step 5, then with the current setting displayed (in the example, if the factory default setting has been changed, the current setting will be TC MODE), proceed as follows.

1 Press the RESET button.

“OFF” (factory default setting) is selected.

2 Press the SET button.

The setting returned to its factory default is saved in memory as the current setting.

To return all settings to their factory default settings

1 Display the setup menu.

2 Press the RESET button.

A message appears, to confirm whether or not you wish to return all settings to their factory default settings.

Message in the monitor

Initialize all items to factory

video section

preset values?

Message in the time

Init setup?

data display

 

 

 

3 Press the SET button.

The message “NOW SAVING...” appears in the monitor video section, and “Saving...” appears in the time data display, while the settings of all items are returned to their factory default settings. These factory default settings are saved in memory.

Note

If you power off the unit while settings are being saved, settings may not be correctly returned to their factory default settings. Wait until the saving is completed before powering off the unit.

To abandon the resetting operation

Instead of pressing the SET button, press the RESET button.

The display returns to the top level of setup menu, leaving the settings unchanged.

Disc Menu

Use the disc menu to delete data on discs and to format discs.

For the method of displaying the disc menu, see “Displaying the Setup and Disc Menus” (page 90).

DISC MENU

STATUS

DELETE

FORMATChapter 6

Menus

The disc menu contains the following items. Characters and symbols inside the brackets [ ] appear in the time data display section.

STATUS [Status] Displays disc or clip status.

DISC [> Disc]: Displays the DISC STATUS screen.

CLIP [> Clip]: Displays the CLIP STATUS screen.

Note

The PDZ-1 Proxy Browsing Software allows you to write TITLE1 and TITLE2 to the disc, but only TITLE1 appears here.

DELETE [Delete] Deletes clips from the disc.

LAST CLIP [> Last Clip]: Deletes the most recently recorded clip.

System Menu 107