Sony 3-270-589-12 (1), PDW-F75 Hiding enhanced items, Meanings of indications on the menu screen

SETUP MENU
DISPLAY CONTROL
CHARA.POSITION
CHARA.TYPE	:WHITE
CHARA.VSIZE	:x1
DISPLAY INFO	:T&STA
SUB STATUS	:OFF
MENU DISPLAY	:WHITE
BRIGHTNESS	:55
ALARM	:ON
MENU STATUS	:DIS
HD CHARA	:ALL

4 Press the ,/OUT button.

This displays all possible settings for the item selected in step 3.

	SETUP MENU
DISPLAY CONTROL
SUB	STATUS	:OFF
*	OFF
	TC MODE
	REMAIN
	CLIP NO
	PLAYBACK REMAIN

5 Press the M/MARK1 or m/MARK2 button to change the setting of the item.

Chapter		SETUP MENU
	DISPLAY CONTROL
6	SUB	STATUS	:OFF
	*	OFF
Menus
		TC MODE
		REMAIN
		CLIP NO
		PLAYBACK REMAIN

6 To change other settings, press the </IN button to return to the previous screen, then repeat steps 3 to 5 as required.

7 When you have completed the settings, press the SET button.

The message “NOW SAVING...” appears in the monitor video section, and “Saving...” appears in the time data display section, while the new settings are saved in memory.

When the saving operation is completed, the monitor video section and time data display section return to their normal indications.

Notes

•If you power off the unit before a save operation is completed, settings may be lost. Wait until the save is completed before powering off the unit.

•If, instead of pressing the SET button, you press the MENU button, the new settings are not saved. The message “ABORT !” appears in the monitor video section and “Abort !” in the time data display section for about 0.5 second, and the system exits the menus. To change more than one setting, be sure to press the SET button after making the settings.

Meanings of indications on the menu screen

On-screen indication	Meaning
Right-pointing arrow (c) at	Pressing the ,/OUT button
the right of a menu item	switches to the next lower
See step 1 of the foregoing	menu level or to a setting
operating procedure (see	selection screen.
page 105).
Left-pointing arrow (C) at	Pressing the </IN button
the left of a menu item	returns to the previous (higher)
See step 2 of the foregoing	menu level.
operating procedure (see
page 105).
Character string at the	Current setting of the menu
right of a menu item	item
	When shown with a colon (:):
	the current setting is the
	same as the factory default
	setting.
	See step 2 of the foregoing
	operating procedure (see
	page 105).
	When shown with a raised
	dot (•): the current setting
	is different from the factory
	default setting.
	See the next item, “Hiding
	enhanced items”.
An * (asterisk) in a	Factory default setting
complete list of settings
See step 4 of the foregoing
operating procedure (see
page 106).

Hiding enhanced items

The setup menu can be used to hide enhanced items. To hide enhanced items, proceed as follows as explained in the previous section “Changing the settings of menu items” to set the MENU GRADE item to “BASIC”. In other words, after selecting MENU GRADE in step 1 of “Changing the settings of menu items”, select “BASIC” and then press the SET button to save the setting to memory.

106 System Menu