3D Innovations NC60 16 Token Ring Menu functions continued, Menu Item and Function, Keystrokes

Models: NC60

1 186
Download 186 pages 19.83 Kb
Page 87
Image 87

 

 

 

 

Token Ring Menu

Table 1.16 Token Ring Menu functions (continued)

 

 

 

 

 

 

 

Menu Item and Function

 

Keystrokes

 

Display

 

 

 

 

 

 

LAA

 

1. Press Menu Up or Menu

 

Menus

 

Set the six byte Locally Administered

 

Down until you see:

 

Token Ring Menu

 

 

 

 

 

Address.

 

2. Press Item Up or Item Down

 

Token Ring Menu

 

 

 

The valid values are:

 

until you see:

 

LAA

 

xxxx xxxx xxxx

 

 

 

 

 

 

3. Press Value Up or Value Down.

 

LAA

=

(where xxxx xxxx xxxx can equal any

 

 

value within the valid range of 4000 0000

 

You will see:

 

xxxx xxxx xxxx

0000 and 7FFF FFFF FFFF)

 

 

 

 

 

For this item (after Step 3), Item Up

 

4. Press Value Up or Value Down

 

LAA

=

moves the cursor to the right through

 

to change the value of the

 

xxxx xxxx xxxx

the displayed LAA and Item Down

 

character above the cursor. The

 

 

 

moves the cursor to the left. This

 

value is incremented or

 

 

 

allows you to change characters

 

decremented by 1 each time

 

 

 

within the string rather than having to

 

the key is pressed. Holding

 

 

 

reenter the entire string.

 

down Value Up or Value

 

 

 

With the cursor displayed under a

 

Down causes continuous

 

 

 

 

scrolling through the values.

 

 

 

character, Value Up increments the

 

 

 

 

 

 

 

 

 

value of that character and Value

 

5. To change other characters in

 

LAA

=

Down decrements the value.

 

the LAA, press Item Up or Item

 

xxxx xxxx xxxx

 

 

Down to scroll right or left

 

 

 

 

 

respectively through the

 

 

 

 

 

character string, then press

 

 

 

 

 

Value Up or Value Down to

 

 

 

 

 

change the value of the

 

 

 

 

 

character above the cursor (as

 

 

 

 

 

in Step 4).

 

 

 

 

 

 

 

 

 

 

6. When you have completed

 

Token Ring Menu

 

 

setting the LAA, press Enter.

 

LAA

 

 

 

You will see:

 

 

 

 

 

 

 

 

 

 

 

7. Press Online. You will see:

 

Ready

 

 

 

 

 

 

 

 

 

 

 

Table 1.16

Page 11 of 12

 

 

 

 

 

 

Chapter 1: Configuring the Printer 1-81

Page 87
Image 87
3D Innovations NC60 manual 16 Token Ring Menu functions continued, Menu Item and Function, Keystrokes, Display, xxxx xxxx