3D Innovations NC60 15 Ethernet Menu functions continued, Menu Item and Function, Keystrokes

Ethernet Menu

Table 1.15 Ethernet Menu functions (continued)

Menu Item and Function	Keystrokes	Display
NetBEUI Bin PS	1. Press Menu Up or Menu	Menus
Enable or disable the NetBEUI binary	Down until you see:	Ethernet Menu
mode of PostScript.	2. Press Item Up or Item Down	Ethernet Menu
The available values are:	until you see:	NetBEUI	Bin PS
On
	3. Press Value Up or Value Down	NetBEUI	Bin PS	=
Off*
	until you see:	New Value
	4. Press Enter. You will see:	Ethernet Menu
		NetBEUI	Bin PS
	5. Press Online. You will see:	Ready
AppSocket Enable	1. Press Menu Up or Menu	Menus
Enable or disable the Ethernet	Down until you see:	Ethernet Menu
AppSocket protocol. The AppSocket	2. Press Item Up or Item Down	Ethernet Menu
in the printer supports Ports 2000,
	until you see:	AppSocket Enabl
9100, and 2501.
The available values are:	3. Press Value Up or Value Down	AppSocket Enabl=
On*	until you see:	New Value
Off	4. Press Enter. You will see:	Ethernet Menu
		AppSocket Enabl
	5. Press Online. You will see:	Ready
AppSocket PDL	1. Press Menu Up or Menu	Menus
Set the default emulation for the	Down until you see:	Ethernet Menu
Ethernet AppSocket protocol.	2. Press Item Up or Item Down	Ethernet Menu
The available values are:	until you see:	AppSocket PDL
Auto*
	3. Press Value Up or Value Down	AppSocket PDL		=
PCL
PostScript	until you see:	New Value
	4. Press Enter. You will see:	Ethernet Menu
		AppSocket PDL
	5. Press Online. You will see:	Ready

Table 1.15 Page 4 of 10

1-62 ❖ DocuPrint NC60 System Administrator Guide