3D Innovations NC60 16 Token Ring Menu functions continued, Menu Item and Function, Keystrokes

Token Ring Menu

Table 1.16 Token Ring Menu functions (continued)

Menu Item and Function	Keystrokes	Display
Port Timeout	1. Press Menu Up or Menu	Menus
Set the time for determining when to	Down until you see:	Token Ring Menu
end an incomplete print job and poll	2. Press Item Up or Item Down	Token Ring Menu
the next port in the polling sequence.
	until you see:	Port Timeout
The available values are:
	3. Press Value Up or Value Down	Port Timeout	=
5 - 300 seconds (60*)
	until you see:	New Value
This item also causes an implicit job
end such as Control D in PostScript or	4. Press Enter. You will see:	Token Ring Menu
<ESC> E in PCL, and invokes the		Port Timeout
emulation functions associated with
	5. Press Online. You will see:
this action (e.g., formfeed, reset, etc.).		Ready
The time changes incrementally by 1
second each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
		Table 1.16 Page 10 of 12

1-80 ❖ DocuPrint NC60 System Administrator Guide