3D Innovations NC60 16 Token Ring Menu functions continued, Menu Item and Function, Keystrokes

Models: NC60

1 186
Download 186 pages 19.83 Kb
Page 83
Image 83
Token Ring Menu

 

 

Token Ring Menu

Table 1.16 Token Ring Menu functions (continued)

 

 

 

 

 

 

Menu Item and Function

Keystrokes

Display

 

 

 

 

 

IP Address

1. Press Menu Up or Menu

Menus

 

Set the four byte IP address.

Down until you see:

Token Ring Menu

 

 

 

 

The available values are:

2. Press Item Up or Item Down

Token Ring Menu

 

xxx.xxx.xxx.xxx

until you see:

IP Address

 

 

 

 

(where xxx = 000 to 255)

 

 

 

3. Press Value Up or Value Down.

IP Address

=

For this item (after Step 3), Item Up

You will see:

xxx.xxx.xxx.xxx

 

moves the cursor to the right through

 

 

 

 

the displayed IP address and Item

4. Press Value Up or Value Down

IP Address

=

Down moves the cursor to the left.

to change the value of the

xxx.xxx.xxx.xxx

 

This allows you to change characters

 

character above the cursor. The

 

 

within the string rather than having to

 

 

value is incremented or

 

 

reenter the entire string.

 

 

decremented by 1 each time

 

 

 

 

 

With the cursor displayed under a

the key is pressed. Holding

 

 

character, Value Up increments the

down Value Up or Value

 

 

value of that character and Value

Down causes continuous

 

 

Down decrements the value.

scrolling through the values.

 

 

 

 

 

 

This item appears only if

5. To change other characters in

IP Address

=

IP Address Res is set to Static.

the IP address, press Item Up

xxx.xxx.xxx.xxx

 

 

or Item Down to scroll right or

 

 

 

left respectively through the

 

 

 

character string, then press

 

 

 

Value Up or Value Down to

 

 

 

change the value of the

 

 

 

character above the cursor (as

 

 

 

in Step 4).

 

 

 

 

 

 

 

6. When you have completed

Token Ring Menu

 

 

setting the IP address, press

IP Address

 

 

Enter. You will see:

 

 

 

 

 

 

 

7. Press Online. You will see:

Ready

 

 

 

 

 

8.Restart printer or power off/on. Manual background Table 1.16 Page 7 of 12

Chapter 1: Configuring the Printer 1-77

Page 83
Image 83
3D Innovations NC60 manual 16 Token Ring Menu functions continued, Menu Item and Function, Keystrokes, Display