Downloading Fonts and Macros
FSDOWNLOAD
Command
The FSDOWNLOAD command is used to download fonts or macros to the DocuPrint NC60 file system. If a file with the same name exists, the downloaded file overwrites it.
Syntax
@PJL FSDOWNLOAD FORMAT:BINARY [SIZE=int] [NAME = “pathname”] [<CR>] <LF> <binary
Parameters
Parameter |
| Functional Range |
| Default |
|
|
|
|
|
SIZE=integer |
| 0 to 231 - 1 |
| N/A |
|
|
|
|
|
NAME=”pathname” |
| ASCII 01 thru 255 |
| N/A |
|
|
|
|
|
SIZE = integer — The size variable indicates the number of bytes in the file to be downloaded. The size indicates the number of bytes immediately following the <LF> to the next UEL command.
NAME = “pathname” — where “pathname” = 0:\PCL\FONTS\<fontname> to download a font named “fontname” to the DocuPrint NC60 or = 0:\PCL\MACROS\<macroname> to download a macro named “macroname” to the DocuPrint NC60. “Fontname/macroname” can be any combination of up to 512 alphanumeric characters.
<binary data> — This is the binary file data to be downloaded, such as font files and macro data.
Use of 1 rather than 0 in the “pathname” will download the font or macro to RAM rather than to the hard drive.