3D Innovations NC60 manual Procedure B, LPR Upgrade Procedure, Upgrading the Printer Software

Upgrading the Printer Software

Procedure B	LPR Upgrade Procedure
	Once the upgrade process has begun do not power
	off your printer!
	1 Print a Configuration Sheet and a Diagnostics Page.
	Keep these pages for future reference. For directions on
	doing this, refer to Table 1.20 on page 1-101.
	2 Send the upgrade file to the printer. Use the format based
	on your client operating system:
	Windows NT (3.51 & 4.)
	lpr -P ps -S <ipaddress> <filename>[RETURN]
	OS/2
	lpr -p ps -s <ipaddress> <filename>[RETURN]
	UNIX (use lp or lpr as appropriate)
	lpr <switches><queue><filename> [RETURN]
	lp <switches><queue><filename> [RETURN]
	Where:
	<ipaddress> = the TCP/IP address the printer has been
	assigned
	<filename> = the path and name of the upgrade file
	<queue> = the native queue to which the printer is
	assigned
	<switches> = use switches as appropriate to your UNIX
	environment
	3 To see if your upgrade was successful see the section
	“Determining a Successful Upgrade” (page 4-20). If
	successful, follow the instructions in the section “After the
	Upgrade” (page 4-20).

4-22 ❖ DocuPrint NC60 System Administrator Guide