3D Innovations NC60 manual Download Fonts

Downloading Fonts and Macros

Download Fonts

The following is a sequence of commands that can be sent to the DocuPrint NC60 to download a font to the disk.

<ESC>%-12345X @PJL<CR><LF>

@PJL FSDOWNLOAD FORMAT:BINARY NAME =”0:\pcl\fonts\font1” SIZE=XX<CR><LF> <binary data><ESC>%-12345X

In this example:

•<ESC>%-12345X is the PJL UEL command which starts this sequence.

•@PJL<CR><LF> is the mandatory PJL command following the UEL command.

•@PJL FSDOWNLOAD... downloads a font named “font1” that is “XX” bytes in size.

•<ESC>%-12345X is the UEL command which ends this sequence.

Invoking this font requires the following PCL sequence:

<ESC>&n6W<HEX’00’>font1<CR,LF>	Sets the current font ID to the given
	string ID “font1”
<ESC>&n6W<HEX’01’>font1<CR,LF>	Associates the current font ID with the
	string ID “font1”
<ESC>&n6W<HEX’02’>font1<CR,LF>	Selects the font referred to as “font1”
	for the primary font

Notes:

1.The case of the string ID must be the same as the case of the fontname in the FSDOWNLOAD command.

2.The byte count (“6” in the above example) must equal the string ID byte count plus 1.

3-6 ❖ DocuPrint NC60 System Administrator Guide