3D Innovations NC60 2 Control Panel keys and their functions continued, Description, Value Down

Models: NC60

1 186
Download 186 pages 19.83 Kb
Page 15
Image 15
Value Down (-)

Control Panel Features

Table 1.2 Control Panel keys and their functions (continued)

Key

Description

 

 

Value Down (-)

If in the menu system, and an item is displayed, pressing this key causes the Control Panel to scroll through the values for the current item in order top to bottom unless a higher priority message is displayed (e.g. operator intervention required, etc.), which preempts menu navigation. Scrolling wraps, such that if the displayed value is the bottom value, pressing this key scrolls to the top value. If no value for the current item is displayed (Item key was pressed but Value key not yet pressed for this item), pressing this key displays the default value for the current item. When setting a numeric value, this key decreases the value by the step amount. It is subject to auto-repeat if held down by more than 1 second, after which the value scrolls repeatedly until the key is released. The decrement for each step may be greater than that for a single key press.

If not in the menu system, and a paper mismatch condition does not exist, this key is ignored.

If a Paper Mismatch condition exists, pressing this key scrolls through the alternate media that may be used instead of the requested media.

If in the Password menu, and the display indicates “Enter Password”, pressing this key causes a password digit “7” to be entered.

Table 1.2 Page 5 of 5

Chapter 1: Configuring the Printer 1-9

Page 15
Image 15
3D Innovations NC60 2 Control Panel keys and their functions continued, Description, Control Panel Features, Value Down