3D Innovations NC60 manual Adjusting Density and Color Balance

Models: NC60

1 186
Download 186 pages 19.83 Kb
Page 142
Image 142
Adjusting Density and Color Balance

Adjusting Density and Color Balance

Adjusting Density and

Color Balance

You may notice, over the course of using the printer, that colors may change. For example, reds may begin to take on a purple cast, or blues may take on a green cast. This happens during the normal use of a color printer and can be easily remedied by using the Density/Color Balance Adjustment procedure described in this section. This procedure, which should be done monthly, will help correct any color shifts.

This Control Panel procedure involves printing a test page and adjusting the densities and colors based on the appearance of the Test Page. You may need to repeat this procedure and test your adjustments until you achieve the desired effect.

If, during the adjustment process, you decide to return to your starting point; you can do so by selecting Cancel Changes from the Color Adjust Menu.

4-8 DocuPrint NC60 System Administrator Guide

Page 142
Image 142
3D Innovations manual Adjusting Density and Color Balance, DocuPrint NC60 System Administrator Guide