3D Innovations NC60 manual @PJL ENTER LANGUAGE = PCL PCL file ESC%-012345X@PJL EOJ ESC%-012345X

Models: NC60

1 186
Download 186 pages 19.83 Kb
Page 131
Image 131

Using the Hard Disk Drive for Secure and Proof Jobs

Job names can be up to 16 alphanumeric characters and passwords must contain four numeric characters (0-7). PCL does not support leading zeros in the password. The printer assigns a default job name if no name or a name with a syntax error is used. The job name is displayed on the Control Panel Password Menu when the associated password is entered. If a password is not assigned or the password contains syntax errors, the job is not printed and is discarded.

The following example creates a Secure Job named “Bond” with a password of 7000:

<ESC>%-12345X@PJL XSECUREJOB @PJL XJOBPASSWORD = 7000 @PJL JOB NAME = "Bond"

@PJL ENTER LANGUAGE = PCL

...PCL file...

<ESC>%-012345X@PJL EOJ <ESC>%-012345X

The printer processes all data following the @PJL ENTER LANGUAGE = PCL command as part of the Secure Job named “Bond.” The job is stored on the hard disk under the name “Bond” with a password of “7000” as defined in the @PJL XJOBPASSWORD command. The @PJL EOJ command signifies the end of the secure job. The EOJ command should be followed by a UEL command.

Chapter 3: Using the Hard Drive 3-9

Page 131
Image 131
3D Innovations NC60 manual @PJL ENTER LANGUAGE = PCL PCL file ESC%-012345X@PJL EOJ ESC%-012345X