3D Innovations NC60 16 Token Ring Menu functions continued, Menu Item and Function, Keystrokes

Token Ring Menu

Table 1.16 Token Ring Menu functions (continued)

Menu Item and Function	Keystrokes		Display
Subnet Mask	1. Press Menu Up or Menu	Menus
Set the four byte Subnet Mask	Down until you see:	Token Ring Menu
address.	2. Press Item Up or Item Down	Token Ring Menu
The available values are:	until you see:	Subnet	Mask
xxx.xxx.xxx.xxx
	3. Press Value Up or Value Down.	Subnet	Mask	=
(where xxx = 000 to 255)
	You will see:	xxx.xxx.xxx.xxx
For this item (after Step 3), Item Up
moves the cursor to the right through	4. Press Value Up or Value Down	Subnet	Mask	=
the displayed Subnet Mask address
	to change the value of the	xxx.xxx.xxx.xxx
and Item Down moves the cursor to
	character above the cursor. The
the left. This allows you to change
	value is incremented or
characters within the string rather
	decremented by 1 each time
than having to reenter the entire
	the key is pressed. Holding
string.
	down Value Up or Value
With the cursor displayed under a	Down causes continuous
character, Value Up increments the	scrolling through the values.
value of that character and Value
	5. To change other characters in	Subnet	Mask	=
Down decrements the value.
	the Subnet Mask address, press	xxx.xxx.xxx.xxx
This item appears only if	Item Up or Item Down to
IP Address Res is set to Static.	scroll right or left respectively
	through the character string,
	then press Value Up or Value
	Down to change the value of
	the character above the cursor
	(as in Step 4).
	6. When you have completed	Token Ring Menu
	setting the Subnet Mask	Subnet	Mask
	address, press Enter. You will
	see:
	7. Press Online. You will see:	Ready

8.Restart printer or power off/on. Table 1.16 Page 8 of 12

1-78 ❖ DocuPrint NC60 System Administrator Guide