3D Innovations NC60 manual Language

Navigating the Menu System

Menu Symbols Two menu symbols (= and *) are used to furnish information about menus and settings. The purpose of

each symbol is described in Table 1.3 below.

Table 1.3 Symbols found in the Control Panel Menu systems

Symbol	Purpose	Example
=	When at a point where a value may be changed, the item	Language	=
	name is displayed on the top line with the = symbol in the last	Français
	character position, and the selected value is displayed on the
	bottom line.
	The example at the right tells you that Language is an option
	that takes a specific setting. One setting for the Language
	option is Français. Another setting is English. (The list of
	available settings is displayed one setting at a time on the
	bottom line of the display as you press Value Up or Value
	Down.)
*	When first arriving at a point where a setting may be changed,	Language	=
	the current value is displayed on the bottom line and a *	English	*
	symbol appears next to it in the last character position. Pressing
	Up Value or Down Value scrolls through the possible values.
	Whenever the current value is displayed, the * is displayed in
	the last character position. Pressing Enter causes the * to
	display in the last character position for the new value. Since
	pressing Enter causes the display to indicate the current menu
	and current item, the asterisk may not be seen until the item
	and current value is displayed again by pressing a Value key.
	The example at the right tells you that Language is currently set
	to English.

1-12 ❖ DocuPrint NC60 System Administrator Guide