3D Innovations NC60 manual

Models: NC60

1 186
Download 186 pages 19.83 Kb
Page 133
Image 133

Using the Hard Disk Drive for Secure and Proof Jobs

The job name is limited to 16 alphanumeric characters in the range ASCII 30 through ASCII 255, <SP> and <HT>. The password must contain four numeric characters in the range ASCII 48 through ASCII 55. The printer assigns a default job name if no name or a name with a syntax error is called out. The job name is the name displayed on the Control Panel Password Menu when the associated password is entered. If no password is assigned or there is a password syntax error, the entire job is printed immediately and is not stored as a proof job.

The following example generates a PCL proof job with name “Sample” and associated with password “7777” requesting five collated sets.

<ESC>%-12345X@PJL XPROOFJOB @PJL XJOBPASSWORD = 7777 @PJL JOB NAME = "Sample" @PJL SET QTY = 5

@PJL ENTER LANGUAGE = PCL

...PCL file...

<ESC>%-012345X@PJL EOJ <ESC>%-012345X

Chapter 3: Using the Hard Drive 3-11

Page 133
Image 133
3D Innovations NC60 manual