Menus 6 Chapter
| TIME CODE [Time Code]: Settings related to the timecode |
| Description |
| |||
| generator |
|
|
|
|
| |
| VITC POS |
| When the system frequency is 60i, 23.98P or 30P |
| |||
| VITC in. |
|
| 20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line |
| ||
|
|
|
|
| from 12 to 20. |
| |
|
|
|
|
| Factory default setting: *18 LINE [>> 18 line] (line18) |
| |
| Note |
|
|
|
| ||
|
|
|
|
|
|
| |
| You can insert the VITC signal in two places. To insert it in two |
|
|
|
| ||
| places, set both this item and VITC POS |
| Note | the system frequency is 60i, 23.98P, or 30P, the VBID |
| ||
|
|
|
|
| When |
| |
|
|
|
|
| (Video Blanking ID) receives priority over a selection of |
| |
|
|
|
|
| “20LINE”. |
| |
|
|
|
|
| When the system frequency is 50i or 25P |
| |
|
|
|
|
| 22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from |
| |
|
|
|
|
| 9 to 22. |
| |
|
|
|
|
| Factory default setting: *21 LINE [>> 21 line] (line 21) |
| |
|
|
|
|
|
| ||
| EE OUT PHASE [> EE out]: Determine the output phase for |
| *MUTING [>> muting]: Suppress the output. |
| |||
| the LTC signal output from the TIME CODE OUT |
| THROUGH [>> through]: Output the timecode input to the |
| |||
| connector when recording timecode and in STOP REC |
| TIME CODE IN connector as it is. |
| |||
| mode (forced |
|
| VIDEO INPUT PHASE [>> V input]: Output the timecode with |
| ||
|
|
|
|
| the same phase as the input video signal phase. |
| |
|
|
|
|
| VIDEO OUTPUT PHASE [>> V output]: Output the timecode |
| |
|
|
|
|
| with the same phase as the output video signal phase. |
| |
|
|
|
|
|
| ||
| SEARCH MUTING [> Srch muting]: Select whether to |
| OFF [>> OFF] : Do not suppress. |
| |||
| suppress the output from the TIME CODE OUT connector |
| *ON [>> ON]: Suppress. |
| |||
| in search (jog/shuttle) mode. |
|
|
|
| ||
|
|
|
|
|
| ||
| PD PRESET [> PD preset]: Select the timecode to preset. |
| 24F TC [>> 24F TC]: Timecode value that becomes the |
| |||
| The |
| reference for |
| |||
| appears only when 24P |
| 30F TC [>> 30F TC]: Pulldown value with respect to the above |
| |||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
| VITC [> VITC]: Specifies whether or not to record VITC |
| OFF [>> OFF]: Do not record VITC. |
| |||
| generated by the internal timecode generator when |
| *ON [>> ON]: Record VITC. |
| |||
| recording |
|
|
|
| ||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| DISC PROTECTION [Disc protct]: Settings related to disc |
| Description |
| |||
| protection |
|
|
|
|
| |
| STILL TIMER [>> STL timer]: Specify the length of time the |
| 0.5SEC [>>> 0.5 sec] to 30MIN [>>> 30 min]: Select time |
| |||
| unit can be in still image mode before switching to disc |
| from 16 settings ranging from 0.5 second to 30 minutes. |
| |||
| protection mode. |
|
| Factory default setting: *8MIN [>>> 8 min] (8 minutes) |
| ||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
| VIDEO CONTROL [Video]: Settings related to video |
| Description |
| |||
| control |
|
|
|
|
| |
| INT VIDEO SG [> Video | HD SIGNAL [>> HD Signal]: |
| *100% COLOR BARS [>>> CB100]: 100% color bar signal |
| ||
| SG]: Select the test | Select the test signal for |
| RAMP (Y/C) [>>> Ramp]: Bias signal |
| ||
| signal to be output from | HD output. |
| GRAY [>>> Gray]: Grayscale signal |
| ||
| the internal test signal |
|
| BLACK [>>> Black]: Black signal |
| ||
| generator. When you set |
|
|
|
| ||
| SD SIGNAL [>> SD Signal]: |
| *100% COLOR BARS [>>> CB100]: 100% color bar signal |
| |||
| V INPUT in the HOME | Select the test signal for |
| BLACK BURST [>>> BB]: Black burst signal |
| ||
| page of the function |
|
| ||||
| SD output. |
|
|
|
| ||
| menu to “SG”, the |
|
|
|
| ||
|
|
|
|
|
| ||
| internal signal generator |
|
|
|
|
| |
| is activated and outputs |
|
|
|
|
| |
| the selected test signal. |
|
|
|
|
| |
| You can record this |
|
|
|
|
| |
| signal. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
98 System Menu