3Digital signal input/output section

1HDSDI INPUT connector

2HDSDI OUTPUT connectors

 

 

 

3 SDSDI OUTPUT

 

 

 

connector

HDSDI INPUT

HDSDI OUTPUT

SDSDI OUTPUT

 

1

2

 

aHDSDI (HD serial digital interface) INPUT connector (BNC type)

This inputs HD format video and audio signals.

bHDSDI (HD serial digital interface) OUTPUT

connectors (BNC type)

These output HD format video and audio signals.

When CHAR SEL on page P1 of the function menu is set to “ON”, and DISPLAY CONTROL >HD CHARA in the setup menu is set to “ALL” (or either “HDSDI2” or “ALL” for the HDSDI OUTPUT 2 connector), information such as timecode, menu settings, and error messages is superimposed on the output signals (see page 40).

cSDSDI OUTPUT connector (BNC type)

This outputs SDSDI signals downconverted from HD video input signals, or the SDSDI signals being played back or being recorded.

When CHAR SEL on page P1 of the function menu is set to “ON”, and DISPLAY CONTROL >SD CHARA in the setup menu is set to “SDI” or “ALL”, information such as timecode, menu settings, and error messages is superimposed on the output signals (see page 40).

4Digital audio signal input/output section

1DIGITAL AUDIO (AES/EBU) INPUT 1/2 and 3/4 connectors

DIGITAL

1/2

3/4

AUDIO

 

 

(AES/EBU)

 

 

INPUT

1/23/4

OUTPUT

2DIGITAL AUDIO (AES/EBU) OUTPUT 1/2 and 3/4 connectors

aDIGITAL AUDIO (AES/EBU) INPUT 1/2 and 3/4 connectors (BNC type)

These input AES/EBU format digital audio signals. The

 

1/2 connector corresponds to audio channels 1 and 2, and

 

the 3/4 connector corresponds to audio channels 3 and 4.

 

To handle input signals as non-audio data, use the AUDIO

 

CONTROL >DATA MODE item of the setup menu (see

 

 

 

 

 

page 102) to set the input of channels 1 and 2 (CH1/CH2

 

 

 

 

IN) or the input of channels 3 and 4 (CH3/CH4 IN) to

1Chapter

“DATA”.

 

b DIGITAL AUDIO (AES/EBU) OUTPUT 1/2 and

Overview

3/4 connectors (BNC type)

 

These output AES/EBU format digital audio signals. The

 

1/2 connector corresponds to audio channels 1 and 2, and

 

the 3/4 connector corresponds to audio channels 3 and 4.

 

5Timecode input/output section

1TIME CODE IN connector

2TIME CODE OUT connector

TIME CODE

IN OUT

aTIME CODE IN connector

Inputs SMPTE timecode generated by an external device.

bTIME CODE OUT connector

Outputs the following timecode, depending on the operating state of the unit.

During playback: Playback timecode

During recording: The timecode from the internal timecode generator or the timecode input to the TIME CODE IN connector.

Note

In E-E mode no timecode is output if TIME CODE >EE OUT PHASE in the setup menu is set to “MUTING” (see page 98).

6Power supply section

1 - AC IN connector

2POWER switch

-AC IN

POWER

Names and Functions of Parts 23