Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
| Manufacturer | Code number |
| Sony | 01 (default) |
|
|
|
| Hitachi | 24 |
|
|
|
| JVC | 33 |
|
|
|
| LG/Goldstar | 76 |
|
|
|
| Panasonic | 17, 49 |
|
|
|
| Philips | 06, 08, 72 |
|
|
|
| Samsung | 71 |
|
|
|
| Sharp | 29 |
|
|
|
| Toshiba | 38 |
|
| |
| The remote performs the following: | |
|
|
|
| Buttons | Operations |
|
|
|
| TV [/1 | Turns your TV on or |
|
| off. |
|
|
|
| TV 2 (volume) +/– | Adjusts the volume of |
|
| your TV. |
|
|
|
| TV PROG +/– | Selects the programme |
|
| position on your TV. |
|
|
|
| TV t (input select) | Switches your TV’s |
|
| input source. |
|
|
|
|
|
|
To operate the TV/DVD button (for SCART connections only)
The TV/DVD button switches between TV mode and DVD mode. Press the TV/DVD button when in stop mode or no menu appears on the TV screen. Point your remote at the recorder when using this button.
TV mode: switch to this when you use the TV’s tuner mainly. When you start playback, the input source for the TV is set to the recorder automatically.
DVD mode: switch to this when you use the recorder’s tuner mainly.
To check the current mode, press DISPLAY (page 32).
If you have a Sony DVD player or more than one Sony DVD recorder
If the supplied remote interferes with your other |
| |
Sony DVD recorder or player, set the command |
| |
mode number for this recorder and the supplied | Hookups | |
DVD recorder or player after you have completed | ||
remote to one that differs from the other Sony |
| |
and | ||
The remote does not function if different | ||
Settings | ||
The default command mode setting for this |
| |
recorder and the supplied remote is “3.” |
| |
command modes are set for the recorder and |
| |
remote. Set the same command mode. |
| |
x |
| |
PROGRAM +/– |
|
| 1 | 2 | 3 | |
Number | 4 | 5 | 6 | |
buttons | ||||
7 | 8 | 9 | ||
| ||||
|
| 0 |
|
</M/m/,,
ENTER
1 Turn off the recorder.
2 Hold down x on the recorder until “codE” appears on the front panel display.
3 Press PROGRAM +/– on the recorder to select the command mode (1, 2, or 3).
The selected command mode appears on the front panel display.
4 Hold down the remote’s ENTER and 1, 2, or 3 of the number buttons corresponding to the command mode selected in step 3, for more than three seconds.
,continued 19