
Inserting and Formatting a Disc
+RW |
When you first insert a new disc, the recorder will ask you to format the disc. Follow the steps below to format the disc. You can also reformat a DVD+RW or
Z "/1
1 2 3
4 5 6
78 9 0
SYSTEM
MENU
</M/m/,,
ENTER
1 Turn on the TV.
2 Press &/1.
The recorder turns on.
3 Switch the input selector on your TV so that the signal from the recorder appears on the TV screen.
4 Press Z (open/close), and place a disc on the disc tray.
6 Press ENTER while [OK] is selected.
The recorder starts formatting the disc. The display shows the approximate time required.
•For a
zHint
For a formatted disc, you can use the disc after “REAd” disappears from the front panel display in step 5 above.
Reformatting a disc+RW
You can erase all contents of a disc to create a blank disc. To format a new
1 Insert a disc.
2 Press SYSTEM MENU to turn on the System Menu.
3 Select [Setup] and press ENTER.
The Setup display appears.
4 Select [Disc] and press ENTER.
5 Select [Format DVD] and press ENTER.
Format DVD | Start |
Finalize
Input Disc Name
Protect Disc
PBC
DivX
Labelled side facing up
5 Press Z (open/close) to close the disc tray.
After “REAd” disappears from the front panel display, the display asks for confirmation.
•For a
6 While [Start] is selected, press ENTER.
The display asks for confirmation.
•For
ENTER.
7 Select [OK] and press ENTER.
Formatting starts.
28