4 Press ENTER at the start of the scene to be erased (point A).
Thumbnail of point A
Edit
Title 1 07/12 0:45:00
Point A | 00:15:00 |
Set Point A
Set Point B
Cancel | 00:15:00 |
OK
+RW +R
Select [Protect] in step 3 of “Erasing and Editing Titles,” and press ENTER.
The title is protected and [ ] (locked) appears in the Title List menu.
To cancel the protection, repeat the steps above and select [Unprotect].
5 Press H, and search for the scene you want to erase by pressing x, X, and m/ M.
6 Press ENTER at the end of the scene (point B).
Edit |
|
|
|
|
|
| |
Title 1 |
|
|
|
07/12 | 0:45:00 |
|
|
|
| Point A | 00:15:00 |
Set Point A |
|
|
|
Set Point B |
|
|
|
Cancel | 00:15:20 | Point B | 00:15:20 |
OK
Thumbnail of point B
To reset either point A or B, select [Cancel] and repeat from step 3.
7 Select [OK], and press ENTER.
The display asks for confirmation.
If you do not want to erase the scene, select [Cancel] and press ENTER.
8 Select [OK], and press ENTER.
The scene is erased.
bNotes
•Images or sound may be momentarily interrupted at the point where you erase the scene.
•Sections shorter than three seconds may not be erased.
•The erased section may be slightly different from the points you selected.
•A chapter mark will not be made at the
+RW
1 Select [Edit] in step 3 of “Erasing and
Editing Titles,” and press ENTER.
2 Select [Divide], and press ENTER.
The display for setting the dividing point appears.
Edit
Divide
Title 2 07/12 0:45:00
#01 00:00:04
Divide |
|
Cancel |
|
OK | 00:00:00 |
Current playback point
3 Press H, and search for the point you want to divide by pressing x, X, and m/ M.
4 Press ENTER at the 1st dividing point.
The 1st point is set.
To reset the point, select [Cancel] and repeat from step 3.
5 Press H, and search for the point you want to erase by pressing x, X, and m/ M.
6 Press ENTER at the 2nd dividing point.
The 2nd point is set.
Editing and Erasing
,continued 57