
Channel and Clock Settings (General)
2Press ENTER while [Set] is selected. The Channel List menu appears.
The [General] setup helps you to make channel, clock, and other settings for the recorder.
Select [General] in the Setup Display. To use the display, see “Using the Setup Displays” (page 65).
| PR | Ch. | Fine | Station | |
| 01 | C 12 | 0 | AWB1 |
|
| 02 | C 23 | 0 | AWB2 |
|
| 03 | C 7 | 0 | DTV |
|
| 04 | C 27 | 0 | CH2 |
|
| 05 | C 17 | 0 | LHTV |
|
| 06 | C 33 | 0 | CSN |
|
| 07 | C 34 | 0 | PTGLE |
|
| 08 | C 47 | 0 | PSG |
|
| 09 | C 10 | 0 | TV2 |
|
| 10 |
|
|
|
|
| 11 |
|
|
|
|
The default settings are underlined.
Auto Channel Setting | France |
Manual CH Setting | Start |
Clock Setting |
|
TV Type |
|
LINE 3 In |
|
Video output format |
|
Power Save |
|
Factory Set |
|
[Auto Channel Setting]
Presets all receivable channels automatically. Select your country. Then select [Start] and press
ENTER.
[Manual CH Setting]
Presets channels manually.
If some channels could not be set using the Auto Channel Setting function, you can set them manually.
If there is no sound or if the picture is distorted, the wrong tuner system may have been preset during [Auto Channel Setting]. Set the correct tuner system manually in the steps below.
1Select [Manual CH Setting] and press ,.
Auto Channel Setting
Manual CH SettingSet
Clock Setting
TV Type
LINE 3 In
Video output format
Power Save
Factory Set
3Press M/m to select the programme position you want to set, and press ENTER.
|
| PR | Ch. | Fine | Station | |
|
| 01 | C 12 | 0 | AWB1 | |
|
| 02 | C 23 | 0 | AWB2 | |
|
| 03 | C 7 | 0 | DTV | |
|
| 04 | C 27 | 0 | CH2 | |
NICAM | 05 | C 17 | 0 | LHTV | ||
06 | C 33 | 0 | CSN | |||
Manual CH Setting | ||||||
07 | C 34 | 0 | PTGLE | |||
Name |
| |||||
| 08 | C 47 | 0 | PSG | ||
Move |
| |||||
| 09 | C 10 | 0 | TV2 | ||
Erase |
| |||||
| 10 |
|
|
| ||
Decoder On/Off |
|
|
| |||
NICAM/Standard | 11 |
|
|
|
4Select an option from the
ENTER.
[Manual CH Setting]: Sets the channel manually. See “To set the channels manually” (page 67).
[Name]: Changes the station name. The display for entering characters appears. To enter characters, see page 33.
[Move]: Sorts the programme positions on the Channel List. Press M/m to move the selected programme position to a new location.
[Erase]: Disables a programme position you do not need.
[Decoder On/Off]: Sets the channels for the decoder. You need this setting to watch or record
[NICAM/Standard]: Sets the channels for the NICAM broadcast. Normally, [NICAM] is lit on the display. If the sound from NICAM broadcast is not clear, press ENTER so [NICAM] disappears.
bNote
Be sure to correctly select the programme position you want to disable. If you disable the wrong programme position by mistake, you need to reset that channel manually.
66