
Checking/Changing/
Cancelling Timer Settings
(Timer List)
+RW |
You can check, change, or cancel timer settings using the Timer List menu.
1 2 3
4 5 6
7 8 9
2 Select a timer setting and press ENTER.
The Timer Record menu in step 4 of “Timer Recording” (page 38) appears.
The programme position, date, start and stop times, and recording mode for the selected timer setting appear.
3 Press </, to select an item and press M/m to change the setting.
•If you want to return to the Timer List without changing, press TIMER.
4 Press ENTER.
The information for the selected timer setting is updated.
0
O RETURN
CLEAR
TIMER
</M/m/,,
ENTER
1 After step 1 above, select a timer setting and press CLEAR.
The display asks for confirmation.
2 Select [OK] and press ENTER.
The selected timer setting is deleted from the Timer List.
•If you want to cancel the deletion, select [Cancel] and press ENTER in step 2.
The Timer List can contain up to 16 timer settings. You can select a timer setting and modify it before the recording starts.
1 Press TIMER to turn on the Timer List.
All the timer settings are listed. You can check information such as the recording date, time, recording mode, etc.
Timer List
PR | Date | Start | Length | Mode | Check | 1/2 |
| ||||||
|
|
| NEW |
|
|
|
|
|
|
|
|
|
|
12 | 12/10 Sun | 19:20 | 30min | SP | Rec. OK |
|
12 | 13/10 Mon | 20:00 | 30min | SP | Duplicate Date | |
10 | 13/10 Mon | 20:15 | 15min | SP | Duplicate Date | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•[Rec. OK] indicates that the timer recording will be made as you set. If the timer settings overlap, [Duplicate Date] will appear.
To turn off the Timer List
Press O RETURN.
When the timer settings overlap
If a timer setting overlaps with another timer setting (i.e., [Duplicate Date] appears in the Timer List), the programme that starts first has priority and the second programme starts recording only after the first programme has finished.
7:00 8:00 9:00 10:00
A
will be cut off |
|
|
| B |
|
|
|
◆When the recordings start at the same time The programme that is set first has priority. In this example, timer setting A is set after B, so the first part of timer setting A will not be recorded.
7:00 8:00 9:00 10:00
A
B
40