
2Select [Manual] and press ENTER.
3Press M/m to set the day, and press ,. Set the month, year, hour, and minutes in sequence. Press </, to select the item to be set, then press M/m to set the numbers.
To change the numbers, press < to return to the item to be changed, and press M/m.
4Press ENTER to start the clock.
[TV Type]
Selects the aspect ratio of the connected TV (4:3 standard or wide).
[ 4:3 Letter Select this when you connect a
Box ] 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen.
[ 4:3 Pan Select this when you connect a
Scan ] 4:3 screen TV. Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit.
[ 16:9 ] Select this when you connect a
[4:3 Letter Box]
[4:3 Pan Scan]
[16:9]
bNotes
•Depending on the disc, [4:3 Letter Box] may be selected automatically instead of [4:3 Pan Scan] or vice versa.
•When connecting to the HDMI OUT jack with output resolution 720p, 1080i, or 1080p, the setting is fixed to [16:9].
[LINE 3 In]
Sets the LINE 3/DECODER jack for inputting encoded video signals.
[ Decoder ] Select this when connecting a
[ Other Select this when connecting
Device ] devices other than the above decoder (e.g., VCR).
[Video output format]
Selects according to your TV connection.
[ RGB ] Select this when connecting via the LINE
[ YPbPr ] Select this when connecting via the COMPONENT VIDEO OUT jacks.
[Power Save]
Selects whether to turn off the front panel display when the power is off.
[ Off ] | The front panel display remains |
| turned on. |
|
|
[ On ] | Turns off the front panel display. |
|
|
[Factory Set]
Returns the recorder’s settings to the factory defaults. See page 74 for procedures.
Note that Parental Control settings in the [Lock] setup remain unaffected.
68