Using Non-Preset Remote Control Operations — Learning Function (continued)

Changing or erasing the function of a learned key or button

To change the learned function, clear it first and perform learning again.

To clear the learned function of a single key or button

1After Step 2, while pressing the RESET key, press the key or button you want to erase.

RESET +

The cleared key flashes together with other learnable keys.

To clear all signals learned for a specific component

1While pressing COMMANDER OFF, press the corresponding Component Select button.

COMMANDER

OFF + CD

When you want to clear signals learned for DECK B/A

Press DECKB/A to display “DECK A”or “DECK B”. You can not clear both decks at the same time.

2While pressing the RESET key, press that Component Select button again. The Commander beeps, the learned contents are cleared. The keys for the component return to their original states before learning.

RESET + CD

Note

If you perform the steps above when no signal is “learned”, the component code setting (page 8) will be reset to the factory setting.

Note that for DECK B/A, if you reset either deck (A or B), the component code for both A and B will be reset to the factory setting.

16