To clear programmed commands
1While pressing COMMANDER OFF, press one of the SYSTEM CONTROL 1, 2, or 3 button.
COMMANDER | SYSTEM CONTROL | ||
OFF | + | 1 | |
The key operations programmed for that button are displayed in order.
2While pressing the RESET key, press the same SYSTEM CONTROL button (1, 2, or 3) again.
RESET | + | SYSTEM CONTROL |
| ||
|
| 1 |
The contents of its program are cleared and all the component names flash.
RESET | LEARN | TV VCR123 DVD DBS TUNER |
| ||
| SC1 | AMP MD DECK CBL CD AB OP |
When you want to set a new program to this SYSTEM CONTROL button, follow the Steps 2 – 5 on Page 21.
To set SYSTEM CONTROL 3 back to the factory setting
1While pressing COMMANDER OFF, press SYSTEM CONTROL 3.
COMMANDER | SYSTEM CONTROL | ||
OFF | + | 3 | |
|
| ||
The programmed key operations are displayed in order.
2While pressing the RESET key, press SYSTEM CONTROL 3.
RESET | + | SYSTEM CONTROL |
| ||
|
| 3 |
The contents of its program are cleared and all the components names flash.
3While pressing the RESET key again, press SYSTEM CONTROL 3 again.
RESET | + | SYSTEM CONTROL |
| ||
|
| 3 |
The series of the
23