Troubleshooting (continued)

Symptom

A system control program does not function correctly.

Remedy

•Make sure that you have programmed the commands in the correct order. (page 20)

•Try changing the orientation of the Commander. If that does not help, try placing the components as close to each other as possible.

•Check the status of the components and make sure that you have set the components properly to receive commands from the SYSTEM CONTROL buttons.

The power of the Commander turns off by itself.

•This Commander is preset at the factory to switch the power off automatically after 10 minutes if left unused. (Auto Power-Off, page 32) You can change the power-off time from 10 to 90 minutes, or set the Commander not to power off automatically.

For the customers in the U.S.A

Customer Support Information

After you have read through this manual, if you still can not get the Remote Commander to work properly, call the Sony Customer Support Helpline at 1-800-822-2217.

36