Adding an Extra Function to the Component Select Buttons (continued)
Example : To program the input select signal of your amplifier to the CD button
Adding a Command that is Required when Selecting a Component
In addition to the original function of selecting the operating keys and buttons of the desired component, the Component Select button can have another remote control signal by “learning” (see page 12).
For example, if you always have to change input select of the amplifier to CD when listening to the CD player, program the signal of “changing the amplifier’s input select” to the CD button of this Commander. Then whenever you press the CD button, it automatically works as the original CD Component Select button and changes also the amplifier input select to CD.
|
| SYSTEM CONTROL |
| e | COMMANDER | 5 | ||
| 1 | 2 | 3 |
|
| OFF | ||
3 | TV | VCR1 | VCR2 | VCR3 | DVD | SAT/CBL |
| |
AMP | CD | MD/DAT | DECK B/A | TUNER | DSP |
| ||
|
|
|
| PROGRAM |
| Á | 2 | |
|
|
|
| + |
| + |
| |
+
––
=
¤
1Place the
Remote control of your component
about 5 – 10 cm (2 – 4 inches) away
2While pressing COMMANDER OFF, press Á+ and PROGRAM +.
COMMANDER | Á | PROGRAM | |
OFF | + | + | + + |
|
|
| |
+
“LEARN” appears and all the component names flash.
LEARN NG TV VCR123 DVD SAT DECKAB
SC1 SC2 SC3 | AMP MD CBL CD FM/AM DSP |
3Press the desired Component Select button.
CD
The selected component name stays lit and “LEARN” flashes.
LEARN NG
CD