To prevent fire or shock hazard, do not expose the unit to rain or moisture.
On safety
Should any solid object or liquid fall into the cabinet, unplug the speaker system and have it checked by qualified personnel before operating it any further.
On power sources
•AC power cord must be changed only at the qualified service shop.
•Before operating the speakers, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate on the rear of the speakers.
•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
•If you are not going to use the speakers for a long time, be sure to disconnect the speakers from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.
On placement
•Do not install the appliance in a confined space, such as a bookcase or
•Do not place the speakers near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.
•Good ventilation is essential to prevent internal heat buildup. Place the speakers in a location with adequate air circulation, and in a way that does not block the rear ventilation holes.
•Do not drag the unit along the floor on installment.
On cleaning
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.
If you have any question or problem concerning your speaker system, please consult your nearest Sony dealer.
2GB