Getting Started
Required cords
Audio connecting cord (1) (supplied)
Black | Black |
White (L) 
White (L)
Red (R) | Red (R) |
When connecting the cords, be sure to match the color- coded cord to the appropriate jacks on the components: Black to Black, Red (right) to Red, and White (left) to White. Be sure to make connections firmly to avoid hum and noise.
Speaker connecting cords (2) (supplied)
(+) | (+) |
Be sure to connect matching speaker terminals. If the connections are reversed (+ to
Connecting to a component other than the
•If your DVD player is equipped with a
•If your DVD player is equipped with a
–Connect the FRONT L/R of the DVD player to the DVD IN L/R of the subwoofer.
–Connect the WOOFER OUT of the DVD player to
the SUBWOOFER IN of the subwoofer.
When you finish connecting, set the rear and center speakers setup to “NONE.” If you cannot make this setting, connect the DVD player to the AUX IN jacks.
•If your DVD player is equipped with a
•If you connect a VCR to the
Setting up for the DVD player
Some steps are necessary for the DVD player depending on the TV or other componentes to be connected.
Use the setup display to change the various settings. For details on the setup display and TV setting, see “Setting and Adjustments” in the instruction manual equipped with the
•To connect the player to a
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9” (default setting).
•To connect the player to a conventional TV
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
Setting up the speakers
Attach the supplied foot pads to the bottom of the subwoofer and the speakers.
Foot pads
You can hang or install the front speakers on a wall using hooks or nuts (commercially available).
Hook | 60 mm |
Nuts
Note
You are responsible for the proper selection and use of mounting hardware purchased at a hardware store, and for the proper and safe mounting of the speakers.
5GB