
Basic Operations
You can use the supplied remote to operate Sony components, such as TV sets, VCRs, and DVD players.
SYSTEM | 1/u |
| |
CONTROL 1/u | Function |
TV VIDEO DVD | |
| buttons |
Operation buttons
+ +
– –
+ + +
– – –
MASTER VOL –
Before using the remote for your Sony component
The table below shows the components that the remote supports.
Function button | Selectable component(s) |
TV | TV (set) |
|
|
VIDEO | VTR 1 (Beta deck), VTR 2 |
| (8 mm deck), VTR 3 (VHS deck) |
|
|
DVD | DVD (player) |
|
|
The TV button selects only the TV set and the DVD button only the DVD player.
Use the VIDEO button to select any other Sony components. The VIDEO button is
To reassign these buttons, press the VIDEO button at the same time you press the button indicated in the table below.
Press VIDEO and | To select | |
|
|
|
TITLE | VTR 1 | (Beta) |
|
| |
(upward cursor button) | VTR 2 (8 mm) | |
|
|
|
MENU | VTR 3 | (VHS) |
|
|
|
To restore all settings to their
Press both 1/u buttons on top of the remote together with the MASTER VOL
All parameters saved in the remote are cleared and restored to their factory settings.
Operating other Sony components
Do the procedure below to operate other Sony components that you may own.
1Press the function button on the remote of the component to be used (TV, VIDEO, or DVD). The component that you selected is activated.
2Operate the components with the operation buttons.
Each operation button on the remote corresponds to a basic operation on the Sony component.
For details on how to use each operation button, refer to the operating instructions of the respective Sony component.
zWhen you press an operation button
The function button of the respective component (TV, VIDEO, or DVD) flashes to let you know what is being operated. If you press an operation button that has no corresponding operation on the Sony component being used, none of the function buttons will flash.
Turning off other Sony components
1Press the function button of the Sony component you want to turn off.
2Press SYSTEM CONTROL 1/u.
The selected component enters standby mode.
8GB