Basic Operations

Listening to the Sound

1/u

INPUT

MODE

LEVEL +/–

1 Turn on the DVD player and insert the disc.

2 Press 1/u to turn on the subwoofer.

The indicator of the 1/u button changes from red (standby mode) to green.

3 Press INPUT repeatedly until the DVD indicator lights up.

4 Press MODE repeatedly until the MASTER VOLUME indicator lights up in green, then press and hold LEVEL – to set the volume level to minimum.

5 Press · on the DVD player to start playing. Press LEVEL + or – to adjust the volume level.

z You can adjust the volume selecting the tone level

Press MODE repeatedly until the sound level indicator (SW VOL/BASS/TREBLE) you want to change lights up, then press LEVEL + or – to adjust the volume of the tone level you select.

z You can reset the tone level to the factory setting

Press and while holding the LEVEL + and –, press 1/u.

z The subwoofer turns on and off automatically according to whether the audio signal is input or not (Auto Power Function)

If no audio signal is input for three minutes, the subwoofer switches to standby mode and the 1/u indicator changes to red (Auto Power Off). When an audio signal is input, the subwoofer turn on automatically and the 1/u indicator changes to green (Auto Power On).

Note

If you press the 1/u button while listening to the subwoofer,

 

the subwoofer switches to standby mode. Press the 1/u

 

button again to turn it on. If the button is not pressed again

 

within three minutes, the Auto Power On function activates

6GB

the subwoofer automatically.

 

Operating using the remote Z

INPUT SELECT

1/u

TV

VIDEO DVD

 

+

+

 

–

–

TREBLE +/–

 

 

+

+

+

BASS +/–

 

S.WOOFER +/–

–

–

–

WOOFER MODE

 

 

 

 

MASTER VOL +/–

MUTING

 

 

The table below shows the operations you can do by using the remote.

To

Press

 

 

Turn on/off the power

1/u

 

 

Adjust the volume

MASTER VOL + or –

 

 

Select the component

INPUT SELECT

 

 

Adjust the volume of each tone

 

LFE *

S.WOOFER + or –

Bass

BASS + or –

Treble

TREBLE + or –

 

 

* Low Frequency Effect

 

Note

The tone level indicator of the subwoofer changes automatically when you adjust the volume of each tone using the remote.

zYou can change the woofer mode according to the source

Press WOOFER MODE on the remote (or press LEVEL + and – on the subwoofer at the same time). When the SW VOL indicator on the subwoofer lights up in green, the mode changes to movie mode (factory setting).

When the indicator lights up in red, the mode changes to music mode. You can listen to the most suitable audio mix, depending on the source.

zYou can mute the sound

Press MUTING on the remote.

To restore the sound, press MASTER VOL + (or MUTING on the remote again).