Step 3:Connect the power cord

With the monitor and computer switched off, first connect the power cord to the monitor, then connect it to a power outlet.

to AC IN

to a power outlet

power cord (supplied)

Step 4:Secure the cords1Bundle the cables and cords.

Using the supplied cord strap, bundle the cables and cords.

Cord strap (supplied)

The illustration of the back of the monitor shown here is that of the SDM-G76D.

The same applies for the other models.

Step 5:Turn on the monitor and computerPress the 1 (power) switch.

The 1 (power) indicator of the monitor lights up in green.

Turn on the computer.

The installation of your monitor is complete. If necessary, use the monitor’s controls to adjust the picture.

•If no picture appears on your screen

Check that the power cord and the video signal cable are properly connected.

•If NO INPUT SIGNAL appears on the screen:

The computer is in the power saving mode. Try pressing any key on the keyboard or moving the mouse.

•If CABLE DISCONNECTED appears on the screen:

Check that the video signal cable is properly connected.

•If OUT OF RANGE appears on the screen:

Reconnect the old monitor. Then adjust the computer’s graphics board within the following ranges.

 

Analog RGB

 

Digital RGB
Horizontal

28–80 kHz

 

28–64 kHz

frequency

(SDM-G76D/SDM-

(SDM-G76D/SDM-

 

G96D)

 

G96D)

 

28–81 kHz

 

28–66 kHz

 

(SDM-G206W)

 

(SDM-G206W)

 

 

 

 

Vertical

56–75 Hz

 

60 Hz

frequency

(SDM-G76D/SDM-

(SDM-G76D/SDM-

 

G96D)

⋅

G96D)

 

56–75 Hz (<1680

60 Hz

 

1050)

⋅

(SDM-G206W)

 

56–60 Hz (=1680

 

 

1050)

 

 

 

(SDM-G206W)

 

 

 

 

 

Resolution

1280 ⋅ 1024 or less

1280 ⋅ 1024 or less

 

(SDM-G76D/SDM-

(SDM-G76D/SDM-

 

G96D)

 

G96D)

 

1680 ⋅ 1050 or less

1680 ⋅ 1050 or less

 

(SDM-G206W)

 

(SDM-G206W)

 

 

 

 

For more information about the on-screen messages, see “Trouble symptoms and remedies” on page 20.

8 (GB)