Technical FeaturesPower saving function

This monitor meets the power-saving guidelines set by VESA, ENERGY STAR, and NUTEK. If the monitor is connected to a computer or video graphics board that is DPMS (Display Power Management Standard) for Analog input/DMPM (DVI Digital Monitor Power Management) for Digital input compliant, the monitor will automatically reduce power consumption as shown below.

SDM-G76D

Power modePower consumption1 (power)

 

 

indicator

 

 

 

normal

45 W (max.)

green

operation

 

 

 

 

 

active off*

1.0 W (max.)

orange

(deep sleep)**

 

 

 

 

 

power off

1.0 W (max.)

off

 

 

 

SDM-G96D

Power mode

Power consumption

1 (power)

 

 

indicator

 

 

 

normal

48 W (max.)

green

operation

 

 

 

 

 

active off*

1.0 W (max.)

orange

(deep sleep)**

 

 

 

 

 

power off

1.0 W (max.)

off

 

 

 

SDM-G206W

Power mode

Power consumption

1 (power)

 

 

indicator

 

 

 

normal

70 W (max.)

green

operation

 

 

 

 

 

active off*

1.0 W (max.)

orange

(deep sleep)**

 

 

 

 

 

power off

1.0 W (max.)

off

 

 

 

*When your computer enters the “active off” mode, the input signal is cut and NO INPUT SIGNAL appears on the screen. After 5 seconds, the monitor enters the power saving mode.

**“deep sleep” is the power saving mode defined by the Environmental Protection Agency.

Automatic picture quality adjustment function (analog RGB signal only)

When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen.

The factory preset mode

When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the monitor’s memory to provide a high quality picture at the center of the screen. If the input signal matches the factory preset mode, the picture appears on the screen automatically with the appropriate default adjustments.

If input signals do not match one of the factory preset modes

When the monitor receives an input signal that does not match one of the factory preset modes, the automatic picture quality adjustment function of this monitor is activated to ensure that a clear picture always appears on the screen (within the following monitor frequency ranges):

Horizontal frequency: 28–80 kHz (SDM-G76D/SDM-G96D) 28–81 kHz (SDM-G206W)

Vertical frequency: 56–75 Hz (SDM-G76D/SDM-G96D) 56–75 Hz (<1680 ⋅ 1050),

56-60 Hz (=1680 ⋅ 1050) (SDM-G206W)

Consequently, the first time the monitor receives input signals that do not match one of the factory preset modes, the monitor may take a longer time than normal to display the picture on the screen. This adjustment data is automatically stored in memory so that next time, the monitor will function in the same way as when the monitor receives the signals that match one of the factory preset modes.

If you adjust the phase, pitch and picture position manually while OFF of AUTO ADJUST is selected

For some input signals, the automatic picture quality adjustment function of this monitor may not completely adjust the picture position, phase, and pitch. In this case, you can set these adjustments manually (page 13). If you set these adjustments manually, they are stored in memory as user modes and automatically recalled whenever the monitor receives the same input signals.

Notes

•While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

•The picture may flicker during this time, but this is not a malfunction. Simply wait a few moments until the adjustment completes.

18 (GB)