SCREEN menu (analog RGB signal only)

xMODE RESET menu (resetting every

mode to the default) 0

You can reset the adjustments to the default settings.

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M button to select (PICTURE) and press the OK button.

The PICTURE menu appears on the screen.

3Press the m/M buttons to select 0 (MODE RESET) and press the OK button.

The MODE RESET menu appears on the screen.

4Press the m/M buttons to select the desired mode and press the OK button.

•OK: To reset every mode in the PICTURE menu to the default settings.

•CANCEL:To cancel resetting and return to the PICTURE menu.

You can adjust the following items using the SCREEN menu.

• AUTO ADJUST

 

 

 

 

 

 

SCREEN

• PHASE

 

 

 

 

 

 

• PITCH

 

 

 

 

 

 

AU TO AD J US T

• H CENTER

 

 

PHA S E

 

 

 

P I TCH

• V CENTER

 

 

H

CENTE R

• RESOLUTION

 

 

V

CENTE R

 

 

RESOLUT I ON

(SDM-G206W only)

 

 

1 6 8 0 x 1 0 5 0 / 6 0 H z

 

 

 

E X I T

Note

When receiving digital RGB signals from the DVI-D input connector for INPUT1, adjustment is unnecessary.

xAutomatic picture quality adjustment function

When the monitor receives an input signal, it automatically adjusts the picture’s position and sharpness (phase/pitch), and ensures that a clear picture appears on the screen (page 18).

Notes

•While the automatic picture quality adjustment function is activated, only the 1 (power) switch will operate.

•The picture may flicker during this time, but this is not a malfunction. Simply wait a few moments until the adjustment completes.

If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture

You can make further automatic adjustment of the picture quality for the current input signal (See AUTO ADJUST).

If you still need to make further adjustments to the picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and position (horizontal/vertical position).

These adjustments are stored in memory and automatically recalled when the monitor receives a previously input and registered input signal.

xMake further automatic adjustments to the picture quality for the current input signal

(AUTO ADJUST)

1Press the MENU button.

The main menu appears on the screen.

2Press the m/M buttons to select (SCREEN) and press the OK button.

The SCREEN menu appears on the screen.

3Press the m/M buttons to select AUTO ADJUST and press the OK button.

The AUTO ADJUST menu appears on the screen.

4Press the m/M buttons to select ON or OFF and press the OK button.

•ON: Make the appropriate adjustments of the screen's phase, pitch and horizontal/vertical position for the current input signal and store them.

Note

When the monitor is turned on or the input signal is changed, AUTO ADJUST makes the automatic adjustments.

•OFF: AUTO ADJUST is not available.

Note

AUTO ADJUST works automatically when the input signal is changed.

5Press the m/M buttons to select and press the

OK button.

Return to the menu screen.

xAdjust the picture’s sharpness and position

manually (PITCH/PHASE/H CENTER/ V CENTER)

You can adjust the picture’s sharpness as follows. This adjustment is effective when the computer is connected to the monitor’s HD15 input connector (analog RGB).

1Set the resolution to 1280 ⋅ 1024 for SDM-G76D and SDM-G96D, 1680 ⋅ 1050 for SDM-G206W on the computer.

2Load the CD-ROM.3Start the CD-ROM For Windows User When Auto run operates:

Select the area, language and model, and click DISPLAY ADJUSTMENT TOOL (UTILITY).

13 (GB)