Sony SLV-SF990G manual Connection to your TV and Set-Top Box STB

Connection to your TV and Set-Top Box (STB)

If you don’t use a STB, skip to page 18.

If your STB has a Scart (EURO-AV) connector

The illustration below shows an example of connecting the STB to LINE-4 IN. In this case, set the STB CONNECTION setting to LINE-4 (see page 26).

Getting Started

Scart cable (supplied with the STB)

		STB Control
		AERIAL
		IN
iLINE-	tLINE
1 (TV)	- 4 IN	AERIAL
		OUT

STB controller

Side view

(supplied)

STB

AERIAL IN

Aerial cable (supplied)

Scart

(EURO-AV)

Scart cable (not supplied)

: Signal flow

You can watch programmes from the Set-Top Box connected to this VCR on your TV even when the VCR is turned off using the Line Through function. When you turn on the STB, this VCR automatically sends the signal from the STB to the TV without turning itself on.

1

2

3

Connect the STB to the LINE-4IN connector as shown above.

Set POWER SAVE to OFF in the OTHER OPTIONS menu.

Turn off the VCR.

To watch a programme from the STB, turn on the STB and the TV.

For details, see page 26.

Note

•You cannot watch programmes from your STB on the TV while recording unless you record a programme from your STB.

continued

Connecting the VCR

15