Sony SLV-SF990G manual Recording a programme on the SmartFile tape, Before you start…, function

Recording a programme on the SmartFile tape

When recording a programme on the
SmartFile tape, no matter what method you
use to record the programme (normal
recording, Video Plus+ recording, etc.),
programme data (date, name, channel,				OK
recording start time , etc.) is stored in the				SMARTFILE
memory of the SmartFile label. The
				CURSOR
SmartFile label can contain data for up to 12	1	2	3	M/m/</,
programmes. When the number of stored	4	5	6
programmes goes over 12, the oldest	7	8	9
programme data is erased from the
		0
SmartFile list. However, a programme
which lasts less than about 20 minutes in LP
mode or about 11 minutes in SP mode

cannot be stored in the memory. When you record a programme on a SmartFile tape which already contains programme data, see “Recording after locating the Blank Time space” on page 85.

Before you start…

•Turn on your TV and set it to the video channel

•Check that the VCR clock is set to the correct time and date.

1Insert a SmartFile tape with its safety tab in place. The SmartFile indicator lights up.

2 Press SMARTFILE.

The SmartFile search list appears on the TV screen.

	PAGE 1
BLANK TIME	SP 1H 55M
START	END

SmartFile

3 Use CURSOR M to select BLANKTIME and press OK. The VCR starts searching for the longest blank part of the tape. The SmartFile search list disappears.

You can now start recording a programme.

function

Tip

•You can protect a recorded programme from accidental over-recording or erasure (see page 100).

Note

•If you press the PAUSE button one or more times during recording, thereby creating short lengths of recorded time between such pauses, programme data may not be stored in the SmartFile label.

continued

Recording using the SmartFile function

83