Sony SLV-SF990G manual Audio dubbing, Turn on the TV and set it to the video channel

Insert a prerecorded tape with its safety tab in place into your (recording) VCR. Search for the end of the section to be replaced and press X PAUSE.

Insert a source tape into the stereo system (or the playback VCR). Search for the point to start playback and set it to playback pause.

1

2

3 Press CLEAR to reset the counter to “0H00M00S.”

4 Rewind the prerecorded tape to the beginning of the section to be replaced.

7 8 9

0

X PAUSE

The VCR enters pause mode. Press AUDIO DUB.

1 2 3

4 5 6

Audio dubbing

This feature lets you record over the normal audio track. The monaural sound previously recorded is replaced while the original hi-fi sound remains unchanged. Use this feature to add commentary to a tape that you have recorded with a camcorder.

Before you start…

•Turn on the TV and set it to the video channel

CLEAR

AUDIO DUB

5

The indicator appears in the display window.

6 To start editing, press the X PAUSE buttons on your VCR and the stereo system (or other VCR) at the same time.

When the counter reaches “0H00M00S,” audio dubbing stops automatically.

To stop while editing

Press x (stop) on this VCR and the stereo system (or other VCR).

78

Audio dubbing