Sony SLV-SF990G manual Prog Name AAB CDE LMO FGH Select Move Program Erase Program

4

CURSOR

•If you want to set the station name, press CURSOR , twice to highlight the station name column only.

•If you don’t want to set the station name, go to step 7.

CHANNEL LIST

	PROG	CH		NAME
	1	C 1 2		AAB
2		C 0 3		CDE
	3	C 5 6
	4	C 2 7
5		C 0 9		FGH
SELECT A CHARACTER			:
NEXT			:
CONFIRM			:	OK

EXIT : MENU

5

Enter the station name.

CURSOR 1 Press CURSOR M/m to select a

character.

Each time you press CURSOR M, the character changes as shown below.

At Bt ... t Z t a t b t...

t z t 0 t 1 t ... t 9 t (symbols) t(blank space) t A

	CHANNEL LIST
		PROG	CH		NAME
		1	C 1 2		AAB
2			C 0 3		CDE
		3	C 5 6		L
		4	C 2 7
5			C 0 9		FGH
SELECT A CHARACTER				:
NEXT				:
PREVIOUS				:

EXIT : MENU

6

7

8

2Press CURSOR, to set the next character. The next space is highlighted.

To correct a character, press CURSOR < until the character you want to correct is highlighted, then reset it.

You can set up to 5 characters for the station name.

To change or to set the station name of another station, repeat steps 2 to 4.

OK	Press OK to confirm the setting.
			CHANNEL LIST
				PROG		CH		NAME
				1	C 1 2			AAB
		2			C 0 3			CDE
				3	C 5 6			LMO
				4	C 2 7
		5			C 0 9			FGH
		SELECT			:
		MOVE PROGRAM			:
		ERASE PROGRAM			:		CLEAR
								EXIT :	MENU
MENU	Press MENU to exit the menu.

Note

• The menu disappears automatically if you don’t proceed for more than a few minutes.

38

Setting/changing the station names