Sony SLV-SF990G manual Disabling unwanted programme positions, If the picture is not clear

Press PROG +/– or the programme number buttons to select the programme position for which you cannot obtain a clear picture.

Disabling unwanted programme positions

After tuning the TV channels, you can disable unused programme positions. The disabled positions will be skipped later when you press the PROG +/– buttons. You can also disable unwanted programme positions using the CHANNEL LIST menu (see page 39).

1 In step 5 above, press programme number button “0” twice to display the number “00” beside CHANNEL SET.

2 Press OK to confirm the setting, then MENU to exit the menu.

If the picture is not clear

Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, the picture is not clear, you may also use the manual tuning function.

1

2 Press MENU, then select SETTINGS and press OK.

3 Select TUNER, then press OK.

4 Select FINE TUNING.

The fine tuning meter appears.

TUNER

PROG. 4

CHANNEL SET	C 2 7 TUV
AFT
FINE TUNING
RETURN

Selected programme position

SET :

EXIT : MENU

5 Press CURSOR </, to get a clearer picture, then press MENU to exit the menu.

Note that the AFT (Auto Fine Tuning) setting switches to OFF.

Tip

• If you want to return to the previous menu, highlight RETURN and press OK.

Note

• The menu disappears automatically if you don’t proceed for more than a few minutes.

36

Presetting channels