Sony SLV-SF990G manual Setting the COMMAND MODE switch

To	Press
Call up the on-screen display	DISPLAY
Change the Teletext page	c/C
Operate the TV menu	Menu buttons
Switch to/from wide mode of a Sony wide TV (For other	WIDE
manufactures’ wide TVs, see “Controlling other TVs with
the remote commander”.)

Notes

•With normal use, the batteries should last about three to six months.

•If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage.

•Do not use a new battery with an old one together.

•Do not use different types of batteries together.

•Some buttons may not work with certain Sony TVs.

Getting Started

Setting the COMMAND MODE switch

To control the Sony VCRs with this remote commander, set COMMAND MODE on the remote commander to the same position as the one on the VCR. Usually, it is set to VTR3. Change the position as shown below to control other Sony VCRs :

VTR1 : For Sony Betamax	1	2	3
format VCRs	4	5	6
VTR2 : For Sony 8mm	7	8	9
format VCRs		0

VTR3 : For Sony VHS format VCRs

COMMAND MODE

continued

Setting up the remote commander 7